How Do You Know What Ios You Have Wii

Download Article

Download Article

This wikiHow teaches you how to play a Wii game from a file that's stored on a USB flash drive rather than on a disc. Go along in listen that this works on the classic Wii, merely non the Wii U. Playing a game from a USB bulldoze requires you to install on your Wii the Homebrew Channel, which voids your Wii'southward warranty and violates Nintendo's terms of apply. Afterwards you've installed all of the necessary items, you'll be able to fire a disc'southward contents onto your flash drive, at which point you can play the game from the USB flash drive rather than from the disc.

1. 1

   Brand sure that you accept the correct equipment. You'll need the following items for this task:^[1]

   • SDHC card - A big SD card of up to eight gigabytes is needed to install Homebrew and perform other file-based tasks.
   • USB flash drive - This is the drive on which you'll install the games.
   • Wii remote - If you have a newer (non-white) model of Wii, you'll need a generic Wii remote to help with the installation.

2. 2

   Format your wink drive as FAT32. To do so, select FAT32 (or MS-DOS (Fatty) on a Mac) in the "File Organization" section of the format menu.

   • Keep in mind that formatting a flash bulldoze volition erase its contents, so support the contents to your reckoner or some other wink drive if necessary.

   Advertisement

3. three

   Empty the Wii'south disc drive. If there is currently a disc in the Wii, eject information technology earlier proceeding.

4. 4

5. v

   Install Homebrew on your Wii. If y'all haven't notwithstanding installed the Homebrew Aqueduct for your Wii, you'll need to practise so before proceeding. The Homebrew Channel allows you to install custom modifications, one of which will let y'all play games off of a USB flash drive.

6. six

   Format your SD card . Once you lot've installed Homebrew with the SD card, you'll need to wipe information technology make clean so that you can use it for the USB installation files. The easiest way to do this is past formatting the SD card.

   • Every bit with the flash bulldoze, choose FAT32 (or MS-DOS (Fatty) on a Mac) as the file organisation.

   Advertisement

1. 1

   Utilise a Windows computer for this part. Unfortunately, you cannot format correctly your flash bulldoze for Wii use on a Mac. If you don't have access to a Windows computer, try using one at a library or borrowing one from a friend.

2. 2

   Determine your Windows flake version . You'll need to know whether your version of Windows is a 64-chip system or a 32-chip organisation in guild to know which file to download in a minute.

3. 3

4. 4

   Click Gratis Download . Information technology'southward the green button in the upper-right corner.

   • Watch out for any add pop-ups and be careful not to click any download links to software y'all didn't intend to download.

5. 5

   Click Start Download . It'southward the light-green push in the center of the page. This will download a nada file containing the setup file for WBFS Manager.

6. half-dozen

   Open the ZIP folder. Double-click the downloaded Zippo folder to open information technology.

7. vii

   Double-click setup.exe . It'southward in the Nothing folder. Doing and then will open the setup window.

   • Make sure you install Dotnet before you gear up the program.

8. 8

   Install the program. Use the following steps to install WBFS Managing director:

   • Click Next.
   • Click Scan to select an install location (optional).
   • Click Side by side.
   • Click Next.
   • Click Yes.
   • Click Close.

9. 9

   Plug your wink bulldoze into your figurer. The flash drive should fit into one of the rectangular USB ports on your estimator.

10. 10

    Open WBFS Manager. Double-click the WBFS Manager app icon, which resembles a Wii on a blue groundwork, to practice so. Y'all tin notice it in your Windows Start bill of fare.

    • The start time you open WBFS Manager, you will demand to click Yeah to allow it to access your system.

11. 11

    Select your flash bulldoze. Click the "Drive" drop-downward box in the upper-left corner of the window, then click your drive's letter (ordinarily F:).

    • If you don't know the flash drive's letter, look for it in the "Devices and drives" section of the This PC app.

12. 12

    Click Format . This will format your flash bulldoze for use with the Wii.

13. xiii

    Eject the flash drive. Click on the wink bulldoze'due south icon in the lower-correct side of the screen, then click Squirt in the pop-up card and remove the bulldoze from your computer.

    • You lot may have to click the upwards-facing pointer here to see the wink drive'southward icon.

    Advertisement

1. 1

   Plug your SD card into your computer. The SD card should fit into your computer's SD card slot angled-side-in, logo-side-up.

   • If your calculator doesn't take an SD carte du jour slot, you'll demand to use a USB adapter for your SD menu as well.

2. 2

3. 3

   Click Download . Information technology'due south the button in the upper-right corner of the screen. This downloads the USB Loader GX zip file.

4. 4

   Extract the files. This process will vary depending on your computer'southward operating system.

   • Windows - Open the Naught binder, click the Excerpt tab, click Extract all, and click Extract at the bottom of the window that appears. The extracted folder volition open when the extraction finishes.
   • Mac - Just double-click the Cypher folder to excerpt it. The extracted binder volition open up when the extraction finishes.

5. v

   Open the "Files" folder. Double-click the USB Loader GX binder, so double-click the Files folder at the summit of the next window.

6. 6

   Re-create the all files in the Files binder. Click on one file in the folder, press Ctrl+A (Windows) or ⌘ Command+A (Mac) to select all of the files, and press Ctrl+C (Windows) or ⌘ Command+C (Mac) to re-create the files.

7. vii

   Click your SD bill of fare's name. It'due south on the left side of the window in File Explorer on WIndows or Finder on Mac.

8. viii

   Paste in the files. Click a blank space in the SD bill of fare's window, then printing Ctrl+V (Windows) or ⌘ Command+V (Mac). The files will copy onto the SD carte.

9. ix

   Squirt the SD card. Once your files finish copying, you tin proceed with removing your SD card. To practise so:

   • Windows - Right-click your SD card'south name in the left-hand pane, then click Eject.
   • Mac - Click the upwards-facing arrow to the right of your SD card's name in the left-hand pane.

   Advertising

1. 1

   Plug your SD card into your Wii. Information technology should fit in a slot in the front end of the Wii.

2. two

   Plow on your Wii. Printing your Wii'southward power button, or use the power button on the remote.

   • The Wii's remote volition need to be on and synced besides.

3. 3

   Printing A when prompted. Doing so will take you to the Wii's primary card.

4. 4

   Start the Homebrew Channel. Select the Homebrew Aqueduct on your Wii's primary menu, then select Get-go when prompted.

5. five

   Select IOS236 Installer . It's on the first folio of the Homebrew Channel. A pop-up menu will announced.

6. vi

   Select Load when prompted. You lot'll detect this choice in the bottom-middle of the pop-up menu.

7. 7

   Press the 1 push. Doing so selects the Install option.

   • If yous're using a GameCube controller, printing the Y button instead.

8. eight

   Select <Download IOS from NUS> . It'south at the bottom of the folio.

   • If y'all don't encounter this option, select the text in brackets at the bottom of the screen and press Right until you see it appear.

9. 9

   Press A when prompted. Doing so volition install the IOS236 base of operations onto your Wii. This process tin take upward of xx minutes, and then be patient.

10. ten

    Press whatsoever button when prompted. This will exit the setup and render you to the Homebrew Channel.

    Ad

1. i

   Select cIOSX rev20b Installer . Information technology's in the heart of the starting time page of the Homebrew Channel.

2. 2

   Select Load when prompted. The installer window menu will open.

3. iii

   Scroll left to the "IOS236" option. This will select the IOS236 file that you installed earlier.

4. four

   Press A . Doing then confirms your selection.

5. 5

   Hold to the terms of apply. Press A on your controller to do so.

6. half dozen

   Select an IOS version. Press Left until you lot run into "IOS56 v5661" between brackets, so press A.

7. 7

   Select a custom IOS slot. Press Left until you see "IOS249" between brackets, and so press A.

8. 8

   Select an installation way. Press Left until y'all see "Network installation" appear between the brackets.

9. nine

   Kickoff the installation. Printing A to brainstorm installing the IOS installer.

10. ten

    Press any push button when prompted. This will movement yous to the next part of the installation.

11. 11

    Select another IOS version. Printing Left until yous see "IOS38 v4123" between the brackets, then press A.

12. 12

    Select some other slot. Press Left until you see "IOS250" between brackets, so press A.

13. 13

    Use the network installer. Select "Network installation" and press A equally you lot did with the concluding installer, then wait for the installation to complete.

14. 14

    Printing any push when prompted, so press the B push button. This will restart your Wii. When it finishes restarting, you lot'll be able to proceed.

    Advertising

1. i

   Navigate to the next folio of the Homebrew Channel. Printing the Right arrow on your Wii remote's D-pad to practise then.

   • You can besides printing the + button.

2. 2

   Select WAD Managing director . Information technology's the 2nd choice on this page.

3. 3

   Select Load when prompted. Doing so volition start upwards the WAD Manager installer.

4. 4

   Printing A . Doing and then agrees to the terms of use.

5. five

   Select "IOS249" to load. Press Left until you see "IOS249" in between brackets, then press A.

6. 6

   Disable the emulator. Select "Disable" in between the brackets and printing A.

7. seven

   Select your SD carte. Select "Wii SD Slot" in between the brackets, and then press A. Doing and then brings upwardly a listing of the files on the SD bill of fare that you plugged in earlier.

8. viii

   Roll down and select WAD . It'southward near the bottom of the screen.

9. 9

   Select the USB loader. Curlicue down to select USB Loader GX-UNEO_Forwarder.wad and press A.

10. x

    Install the WAD Manager. Press A when prompted to do so.

11. xi

    Press whatsoever button when prompted, then press the Abode ⌂ push button. This will restart the Wii. Once the Wii finishes restarting, you'll be back on the second page of the Homebrew Channel.

    Ad

1. 1

   Press the Home ⌂ push button once more. Doing and so brings up the Domicile menu.

2. ii

   Select Shutdown . Information technology'southward at the bottom of the bill of fare. Your Wii will ability down.

   • It's all-time to await until your Wii fully powers downwardly before proceeding.

3. iii

   Plug your wink drive into your Wii. The wink drive should plug into a USB port at the back of the Wii.

4. 4

   Plough back on your Wii. Printing your Wii'south power push to practice so.

5. five

   Press A when prompted. Doing and so will take you to the Wii'southward principal menu, where you should now encounter a USB Loader GX aqueduct to the right of the Homebrew Channel.

6. half dozen

   Select USB Loader GX . It'due south next to the Homebrew Channel.

7. 7

   Select Start . Doing so volition load the USB Loader GX program.

   • This process volition take several minutes, especially the outset fourth dimension you run the plan.
   • If yous see a "Waiting for your irksome USB" message, try plugging the USB flash drive into a different port on the dorsum of the Wii.

8. 8

   Insert a game. Identify in the Wii the disc for a game that you want to back upward to the USB flash bulldoze.

9. 9

   Select Install when prompted. The plan volition begin reading the contents of the disc.

10. 10

    Select OK when prompted. Doing then will prompt your Wii to brainstorm burning the disc onto the USB wink drive.

    • This process will take quite some time, and the burning progress bar may appear to freeze at multiple points. Practise not remove your USB flash drive or restart your Wii if this happens.

11. 11

    Select OK when prompted. This will consummate the burning process.

    • At this point, you tin can eject the game disc from the Wii.

12. 12

    Play your game. Click the game's proper name, then click the spinning disc icon in the middle of the window. This will launch the game.

    Advertisement

Add New Question

• Question

  How practice I play games from my USB drive when the screen goes blackness?

  

  If the Wii is stuck on the black screen, your console may have crashed. If you lot cannot force a shutdown, the only way is to unplug the Wii'south ability. If the screen goes black and returns to the Wii menu, you'll need to install a cIOS.

• Question

  What if I accept already 'hacked' my Wii? Do I just skip home-brewing again?

  

  Yes, yous should skip that step as y'all already hacked it and already can install homebrew apps.

• Question

  How do I format my hard drive to play Wii games?

  

  Use a tool such as WBFS manager or WiiBackup Director to format your hard or USB drive to be used for Wii games.

• Question

  Is it necessary that I format the SD card subsequently installing the homebrew channel?

  

  Later homebew is installed, you just demand to delete the files on your SD card. Formatting the carte du jour is not required.

• Question

  Can I download a game, copy it to a USB drive, so run it with the USB loader?

  

  Unfortunately, that'south non possible. You lot tin can install Wii ISOs from the internet, so put information technology on your USB with the Wii backup managing director.

• Question

  I hacked my Wii and used Wii Backup manager and opened USB Loader GX. The image of the installed game worked, and I thought the gameplay worked, but information technology didn't it e'er send me back to the Wii menu. Why?

  

  Milos Tosic

  Community Answer

  Did you try to load another game? It may be considering the WBFS for that game is broken.

• Question

  How practise I plow my controller back on? On parts 3 and 4 it turns off and won't turn back on.

  

  If you are using a black or any non-white Wii remote, it has the motion plus controller in it. Those Wii remotes will not work. Endeavor using the generic white Wii remote. If that does not work, attempt plugging in the generic GameCube controller.

• Question

  Regarding steps 4 and 5: it appears that the newer version of the files don't include the programme from the second screenshot (the ane in blue). Is information technology no longer necessary?

  

  No. You only demand to install the Homebrew Channel and USB Loader GX. Aught else is needed.

• Question

  Well-nigh the end of step 5, I close the "dop-mii," but the screen where I am supposed to press left until IOS36 does non pop upwardly, and I am returned to the home screen. Is it successfully installed or did I do something wrong?

  

  This guide is outdated. You lot just need to install the Homebrew Aqueduct and use a Homebrew app chosen USB Loader GX. Some guides will recommend you format the drive with WBFS Director, merely this is unnecessary. Don't install cIOS'south or use DOP-mii since those tools tin ruin your Wii. If your Wii nevertheless works, don't try to install anything else!

• Question

  How practice I cheat in games? Tin can I cheat in online games?

  

  B0ihelpz

  Customs Respond

  You can mod games with a Homebrew App called Riivolution. You cannot cheat in online games, as Nintendo close down their WiFi services for Wii.

Bear witness more answers

Ask a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertisement

• Consider using an external hard bulldoze for meliorate storage capacity.

• Wii games tend to have up around 2 gigabytes per title, so plan appropriately when buying a flash drive.

• When on the chief page for USB Loader GX, y'all can press the one button to update the encompass fine art for each game on the flash drive.

Advertisement

• Do not shut down the Wii while installing anything mentioned in this article.

• Pirating games is both against Nintendo'southward terms of apply and against the police force in general.

Advertisement

About This Article

Article Summary X

1. Install the Homebrew aqueduct on your Wii.
ii. Create a Wii flash bulldoze.
3. Download the installation files to your SD card and plug information technology into your Wii.
4. Showtime Homebrew.
5. Follow the prompts to install IOS263, cIOSX Rev20b, and USB Loader GX.
half dozen. Chutdown your Wii, insert your bulldoze, and turn the Wii back on.
7. Select USB Loader GX.
8. Insert a game to burn it onto your USB drive.
For more help, including how to format your SD card for installation files, read on!

Did this summary help yous?

Thanks to all authors for creating a page that has been read 861,201 times.

Did this commodity help yous?

mannwasse1989.blogspot.com

Source: https://www.wikihow.com/Play-Wii-Games-from-a-USB-Drive-or-Thumb-Drive

Share this post